LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2002 >> Bravada AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Fuel Systems >> Fuel Pressure Regulator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Regulator: Installation

    NOTE: If reusing fuel pressure regulator, inspect filter screen for contamination. If filter screen is contaminated, replace fuel pressure regulator.
  1. Lubricate NEW "O" rings with clean engine oil. Install fuel pressure regulator into regulator housing on fuel rail. Install fuel pressure regulator retainer and fuel return line retainer. Tighten fuel pressure regulator retainer and fuel return line retainer screws to specification. See TORQUE SPECIFICATIONS .
  2. Connect fuel return line at fuel pressure regulator. See FUEL LINE DISCONNECT FITTINGS . Connect fuel pressure regulator vacuum line. Connect negative battery cable.
  3. Turn ignition switch to ON position for 2 seconds. Turn ignition switch to OFF position for 10 seconds. Turn ignition switch to ON position. Check for fuel leaks. Repair as necessary. Install engine wiring harness into retaining clips at front of engine. Install air cleaner resonator onto top of engine.
scientia non olet · About LEMON Manuals