Fuel Injector Installation Note
WARNING: This page is about a different car, the 2004 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Use new fuel injector O-rings.
- Apply a small amount of engine oil to the O-rings and install them into the fuel distributor.
- Verify that the O-rings and the fuel injector sealing surfaces are free of foreign material.
- Clean with gasoline if necessary.
- Install the fuel injectors in the fuel distributor with a light twisting motion so that the O-rings will not be folded.