LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2003 >> Bravada AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Repair Instructions >> Video Display Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

IMPORTANT: Ensure the lock washers are fully seated, completely exposing the bolt threads.
  1. Install the video assembly to the vehicle.
  2. Lift the and adjust the video assembly in order to install the T-hook (1) to the video player bracket.

    Ensure the T-hook is fully seated to the bracket.

  3. Support the front of the video assembly and connect the video assembly electrical connector (2).
  4. Align the retaining fastener (3) to the corresponding hole in the video player bracket.
  5. Raise the front of the video assembly to install the retaining fastener (3).
  6. Partially install the rear retaining bolts.
  7. Adjust the video display screen to a full open position.
  8. Partially install the front retaining bolts.
    NOTE: Refer to Fastener Notice   in Cautions and Notices.
  9. Fully seat the retaining bolts.

    Tighten 

    Tighten the bolts to 9 N.m (80 lb in).

  10. Verify the video display for proper operation.
  11. Close the video display screen.
  12. Install the bolt cover bezel.
scientia non olet · About LEMON Manuals