LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1736 (Lighting Systems) >> Repair Instructions >> Ambient Light Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Ambient Light Sensor
    GM729432Courtesy of GENERAL MOTORS CORP.
  1. Position the sensor to the trim pad.
  2. In order to install the sensor to the trim pad, rotate the sensor clockwise 1/4 turn.
    3. Fig 2: View Of Instrument Panel (I/P) Upper Trim Pad
    GM718025Courtesy of GENERAL MOTORS CORP.
  3. Position the trim pad to the upper portion of the instrument panel (IP).
  4. Connect the electrical connector to the sensor.
  5. Remove the shop rags from the windshield defrost vents.
  6. Install the trim pad to the IP. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper in Instrument Panel Gages and Console.
  7. Install the windshield garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About LEMON Manuals