Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the spark plug wire. Refer to Spark Plug Wire Replacement .
- Remove the washer solvent container to gain access to the #2 spark plug. Refer to Washer Solvent Container Replacement (Envoy, TrailBlazer) or Washer Solvent Container Replacement (Rainier) in Wiper/Washer Systems.
- Loosen the spark plug 1-2 turns.
- Brush or using compressed air, blow away any dirt from around the spark plug.
- Remove the spark plug.
If removing more than one plug, place each plug in a tray marked with the corresponding cylinder number.