LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Opel >> 1974 >> 1900 Standard Trans >> Repair and Diagnosis >> General Information >> Specifications Index >> Wheel Alignment - Specifications & Adjustments >> Camber >> All Models
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All Models

Raise front of vehicle and place jack stands below lower control arms. Remove wheel on side to be adjusted. Remove ball joint from upper control arm and front steering knuckle. To adjust camber, lift upper control arm and rotate ball joint flange 180°.

NOTE: Only two adjustments are possible. Manufacturer adjusted camber to smallest possible negative camber.

Rotating ball joint flange will make camber more negative. To reassemble, reverse disassembly procedure.

scientia non olet · About LEMON Manuals