LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1986 >> Conquest 2.6 H, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Testing >> Control Relay
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control Relay

  1. Remove control relay from cowl (left side). Apply positive battery voltage to terminal No. 2. Ground terminal No. 4. Using a DVOM, check for continuity between terminals No. 1 and 3 of relay. There should be continuity.
  2. Remove battery voltage from terminal No. 2. Remove ground wire from terminal No. 4. Using a DVOM, check for continuity between terminals No. 1 and 3. Continuity should not be present. Check for continuity between terminals No. 2 and 4. Continuity should be present. If DVOM reads incorrectly, replace control relay.
scientia non olet · About LEMON Manuals