LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1986 >> Conquest 2.6 H, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> ECI System >> Testing >> Component Testing & Inspection >> Resistor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Component Testing & Inspection: Resistor

  1. Disconnect electrical connector from resistor. Measure resistance across terminal Nos. 1 and 2, then 1 and 3. If resistance is about 6 ohms, resistor is good.
  2. If resistance measures zero, or is abnormally large, resistor has short or open circuit. Replace resistor.
Fig 1: EFI Control Relay Terminal Positions
G42221
scientia non olet · About LEMON Manuals