LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1991 >> Colt GL, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Pump >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Fuel pump assembly is located inside fuel tank. Release fuel pressure from system. See FUEL SYSTEM PRESSURE RELEASE  . Raise vehicle on hoist. Drain fuel into suitable container. Disconnect electrical connectors and fuel hoses at fuel tank.
  2. Remove fuel filler hose from fuel tank. Remove nuts securing fuel tank. Remove fuel tank from vehicle and remove fuel pump assembly. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATION  table.
scientia non olet · About LEMON Manuals