Dynamic Damper
Dynamic damper must be properly positioned on axle shaft. Position damper so proper distance exists between damper and end of boot with axle shaft in a straight position. See Fig 1 . Distance must be within proper specification. See DYNAMIC DAMPER INSTALLATION SPECIFICATIONS table.
DYNAMIC DAMPER INSTALLATION SPECIFICATIONS
| Application | (1) Damper-To-Boot End Distance | |||
|---|---|---|---|---|
| Colt, Colt 200, Summit | ||||
| 1.5L | 17.1-17.3" (434-439 mm) | |||
| 1.6L | 5.5-5.7" (140-145 mm) | |||
| Colt Vista | 5.7-6.0" (145-152 mm) | |||
|
||||