Alternator Replacement

REMOVAL
1. Disconnect negative battery cable.

WARNING: Failure to observe this step may result in an injury from hot battery lead at alternator.

2. Disconnect battery leads and harness connector at alternator.
3. Loosen mounting bolts.
4. Remove alternator belt.
5. Remove mounting bolts, then remove alternator.

INSTALLATION
1. Install alternator to mounting brackets with bolts, (Do not tighten).
2. Install alternator belt.
3. Adjust alternator belt tension, then tighten alternator mounting bolts.
4. Install battery lead and harness connector at alternator.
5. Connect negative battery cable.