October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Coil Testing
- Using an ohmmeter, check continuity between B+ terminal and base of ignition coil. See Fig 1
. Reading should be high (infinite or open circuit). If not, replace coil.
- Check continuity between B+ terminal and C- terminal. Reading should be low or zero (continuity). If not, replace coil.
- Check continuity between C+ terminal and coil secondary terminal. If reading is infinite (open circuit), replace coil.
Courtesy of GENERAL MOTORS CORP.