Programming Procedure
NOTE:
When replacing transmitter or keyless entry module, do the following test steps.
- Turn ignition switch to OFF. Jumper connector terminal A to B. Door locks will lock and unlock in approximately two seconds.
- Depress UNLOCK button on one transmitter. Door locks will lock and unlock in approximately two seconds. The first transmitter is now programmed.
- Repeat step 2) using other transmitter. If only one transmitter is being used, disconnect jumper from program connector.
PROGRAM CONNECTER TERMINAL COLOR ID
| Terminal | Color | |
|---|---|---|
| A | ||
| LE & SE | Red | |
| SSE | Tan | |
| B | Black | |