Main Bearing Clearances
| Crankshaft Bearing Clearance (Production) | 0.0007 - 0.00212 | |
| Crankshaft End Play | 0.0015 - 0.0078 | |
| Crankshaft Main Journal Diameter | Production | 2.558 - 2.559 |
| Service Limit Minimum | 2.558 | |
| Crankshaft Main Journal Out-Of-Round | Production | 0.000118 |
| Service Limit | 0.00031 | |
| Crankshaft Main Journal Taper | Production | 0.00039 |
| Service Limit | 0.00078 | |
| Crankshaft Runout (At Rear Flange) | 0.01 | |
| Crankshaft Thrust Wall Runout | 0.001 | |
| Crankshaft Thrust Wall Width | Production | 1.029 - 1.032 |
| Service Limit Maximum | 1.036 |