Visual/Physical Check

Visual/Physical Check

Several of the symptom procedures ask for a Careful Visual/Physical Check. This step is extremely important it can lead to correcting a problem without further checks and can save valuable time. This check includes:

^ The PCM grounds for being clean, tight, and in their proper location.
^ Vacuum hoses for splits, kinks, and proper connections, as shown on the Vehicle Emission Control Information label - Check thoroughly for any type of leak or restriction.
^ The Mass Air Flow (MAF) sensor installation. The arrows on the sensor must point toward the engine
^ The air intake ducts for being collapsed or for having damaged areas.
^ Air leaks at throttle body mounting area, Mass Air Flow (MAF) sensor, and the intake manifold sealing surfaces.
^ The ignition wires for cracking, hardness, proper routing and carbon tracking.
^ The engine harness wiring and terminals for proper connections, pinches or cuts.