HVAC System - Manual

REMOVAL PROCEDURE




1. Remove the I/P cluster trim plate.
2. Remove the retaining bolts from the HVAC control assembly.
3. Pull the control assembly out from the instrument panel.




4. Disconnect the electrical connectors and the vacuum harness from the HVAC control assembly.
5. Remove the HVAC control assembly.

INSTALLATION PROCEDURE




1. Connect the electrical connectors and the vacuum harness to the HVAC control assembly.




2. Install the HVAC control assembly into the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the retaining bolts to secure the HVAC control assembly.

Tighten
Tighten the control assembly bolts to 2 N.m (18 lb in).

4. Install the I/P cluster trim plate.