Installation Procedure
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Align the ambient air temperature sensor (3) to the radiator air baffle.
- Install the push-in retainer (2) to the ambient air temperature sensor.
- Connect the electrical connector (1) to the ambient air temperature sensor.
- Drive the vehicle at a speed of 32 km/h (20 mph) for approximately one and a half minutes or at a speed of 72 km/h (45 mph) for approximately one minute in order to obtain the ambient update.