Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Ensure the air temperature sensor is sealed to the instrument panel cluster trim plate in order prevent sampling the air behind the dash.

Install the air temperature sensor to the aspirator duct.
Ensure that the duct is connected at the module.
Connect the electrical connector for the sensor.
Install the IPC trim plate. Refer to Refer to TRIM PLATE BEZEL REPLACEMENT - IP CLUSTER in GAUGES AND INSTRUMENT PANEL .

Fig 1: Air Temperature Sensor To The Aspirator Duct

Courtesy of GENERAL MOTORS CORP.