LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 429 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Electronic Compass Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the compass sensor to the overhead console.
  2. Install the overhead console. Refer to DRIVER INFORMATION CENTER REPLACEMENT (WITHOUT SUNROOF)  or DRIVER INFORMATION CENTER REPLACEMENT (WITH SUNROOF) .
  3. Calibrate the compass. Refer to ELECTRONIC COMPASS CALIBRATION .
    Fig 1: Installing Compass Sensor To Overhead Console
    G01476615Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals