LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and reposition the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems.
  2. Remove the front end sheet metal diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal - Right in Body Front End.
  3. Remove the battery ground (negative) cable from the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure (LA1)  or Battery Negative Cable Disconnect/Connect Procedure (LY7) .
  4. Remove the battery positive cable from the battery.
  5. Fig 1: View Of Battery
    GM161292Courtesy of GENERAL MOTORS CORP.
  6. Remove the battery hold down retainer.
  7. IMPORTANT: Do not tip the battery more than 40 degrees.
  8. Remove the battery.
  9. Fig 2: Identifying Battery Insulator
    GM260579Courtesy of GENERAL MOTORS CORP.
  10. Remove the battery insulator from the battery.