Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Headlamp Switch Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the headlamp switch.

Fig 2: Locating Headlamp Switch

Courtesy of GENERAL MOTORS CORP.

Position the headlamp switch to the retainers in the I/P carrier.
Install the headlamp switch to the I/P carrier. Press the switch into place until fully seated.
Install the I/P l cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) in Instrument Panel, Gages and Console.