Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of License Lamp Components

Courtesy of GENERAL MOTORS CORP.

Install the bulb to the license plate lamp socket.
Install the license plate lamp socket, turning clockwise.
Install the license plate lamp to the end gate.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 2: Locating License Lamp Screws

Courtesy of GENERAL MOTORS CORP.

Install the screws to the license plate lamp.
Tighten: Tighten the screws to the license plate lamp to 2 N.m (18 lb in).
Install the license plate.