Fuel System Pressure Release
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix, 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2002 Buick Regal, and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
- Turn OFF the ignition. Disconnect the negative battery cable in order to avoid possible fuel discharge if an accidental attempt is made to start the engine. On 3.8L, remove fuel injector sight shield (upper engine cover) from engine. On all models, install Fuel Pressure Gauge Adaptor (J-34730-262) to the fuel pressure connection on the fuel rail.
- Connect Fuel Pressure Gauge (J-34730-1A) to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage. Install the bleed hose into an approved container and open the valve to bleed the system pressure.
- The fuel connections are now safe for servicing. Drain any fuel remaining in the fuel pressure gauge into an approved container. Remove the fuel pressure gauge and adaptor.