LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the stabilizer shaft to the vehicle from the right side of the vehicle.
    Fig 1: Installing Stabilizer Shaft
    G01499512Courtesy of GENERAL MOTORS CORP.
  2. Install the stabilizer shaft insulators (4) and brackets. Refer to STABILIZER SHAFT INSULATOR REPLACEMENT  .
  3. Install the stabilizer shaft bolts.

    Tighten  Tighten the stabilizer shaft bolts to 48N-m(35lb ft).

  4. Install the left and right stabilizer shaft links. Refer to STABILIZER SHAFT LINK REPLACEMENT  .
  5. Install the tires and wheels.
  6. Lower the vehicle.
    Fig 2: Installing Stabilizer Shaft Insulators
    G01499513Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals