LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Wire Harness Assembly Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the wire harness to the steering column.
  2. Replace all the tie straps (2).
  3. Connect all the electrical connectors.
  4. Install the steering column. Refer to STEERING COLUMN REPLACEMENT  .
    Fig 1: Installing Wire Harness To Steering Column
    G01499467Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals