LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek FWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - STEYR >> Repair Instructions >> Speed Sensor Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Raise and support the vehicle.
  2. Disconnect the electrical connector from the speed sensor.
  3. Remove the speed sensor/vent hose bolt (3) from the transfer case.
  4. Reposition the pinion housing vent hose (2) and mounting bracket away from the speed sensor bolt boss.
    Fig 1: Identifying Pinion Housing Vent Hose, Mounting Bracket & Speed Sensor Bolt
    G01499952Courtesy of GENERAL MOTORS CORP.
  5. Remove the speed sensor (1).
  6. Remove O-ring from the speed sensor, if necessary. The O-ring may be reused if it is not cut or damaged.
    Fig 2: Removing Speed Sensor
    G01499953Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals