Ignition Coil: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the spark plug wires. Note the position from which the wires are removed.
2. Remove the 2 screws that secure the ignition coil to the ignition control module.
3. Remove the ignition coil.

INSTALLATION PROCEDURE




1. Install the ignition coil.
2. Install the 2 attaching screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 4.5 N.m (40 lb in).

3. Connect the spark plug wires.