Sunroof / Moonroof Module: Service and Repair

SUNROOF CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE
1. Position the sunroof to the fully closed position.
2. Remove the headliner.




3. Remove the sunroof control module from the sunroof module by sliding the control module towards the center of the vehicle.




4. Disconnect the electrical connectors from the sunroof control module.
5. Remove the control module from the vehicle.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the sunroof control module.
2. Position the control module retainer tabs to the slots in the sunroof module.




3. Install the control module to the sunroof module by sliding the control module to the right, pressing into place until fully seated.
4. Inspect for the proper operation of the sunroof.
5. Install the headliner.