LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Sunfire Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement (2.2L L61) >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disconnect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .
  2. Disconnect the electrical connector (1) from the cruise control module.
    Fig 1: Disconnecting Electrical Connector From Cruise Control Module
    G01559380Courtesy of GENERAL MOTORS CORP.
  3. Open the throttle body cam slightly.
  4. Disconnect the cruise control cable from the throttle body cam lever.
  5. Remove the cruise control cable from the throttle body bracket.
  6. Remove the cruise control cable from the retainer clip on the engine.
    Fig 2: Disconnecting Cruise Control Cable From Throttle Body Cam Lever
    G01559381Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
    Fig 3: Disconnecting Cruise Control Cable From Cruise Control Module
    G01559382Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the cruise control cable slug from the ribbon buckle.
    Fig 4: Disconnecting Cruise Control Cable Slug From Ribbon Buckle
    G01559383Courtesy of GENERAL MOTORS CORP.
  9. Remove the bolts (1) from the cruise control module.
    Fig 5: Removing Bolts From Cruise Control Module
    G01559384Courtesy of GENERAL MOTORS CORP.
  10. Remove the bolt and nut (1) from the cruise control module mounting bracket.
  11. Remove the cruise control module from the engine compartment.
    Fig 6: Removing Bolt And Nut From Cruise Control Module Mounting Bracket
    G01559385Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals