Installation Procedure
- Install the seat back heater element.
Courtesy of GENERAL MOTORS CORP.
- Install the front seat back cover. Align the marks on the cover and the pad.
- Install the hog rings from the cover to the pad.
- Install the cover over the pad while aligning the hook and the loop retainers.
- Install the hook and the loop retainers, securing the cover to the pad.
Courtesy of GENERAL MOTORS CORP.
- Install the cover to the front retainer at the side impact airbag.
Courtesy of GENERAL MOTORS CORP.
- Install the cover to the rear retainer at the side impact airbag.
- Install the side air bag to the front seat. Refer to one of the following procedures:
Courtesy of GENERAL MOTORS CORP.
- Install and adjust the cover to the side air bag retainer, by pressing in and pulling down on the cover.
Courtesy of GENERAL MOTORS CORP.
- Reposition the end flap to the seat back cover.
Courtesy of GENERAL MOTORS CORP.
- Install the J-hook retainer at the bottom of the seat back cover.
- Install the back to the front seat. Refer to Seat Back Replacement - Front .
- Install the headrest. Refer to Head Restraint Replacement - Front Seat .
- Install the armrest. Refer to Armrest Replacement - Front Seat .
- Install the bucket seat. Refer to Seat Replacement - Bucket .