Removal Procedure

When replacing battery cables, be sure to use replacement cables that are the same type, gage and length.

1. Remove the battery ground (negative) cable from the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure (LA1)  or Battery Negative Cable Disconnect/Connect Procedure (LY7) .
Fig 1: View Of Battery Positive Cable
Courtesy of GENERAL MOTORS CORP.
2. Loosen the battery terminal nut.
3. Remove the battery positive cable from the battery.
Fig 2: Locating Battery Positive Cable Nut & Cable
Courtesy of GENERAL MOTORS CORP.
4. Remove the battery positive cable nut and cable from the underhood electrical center.
Fig 3: Identifying Battery Positive Cable Nut And Cable At The Generator
Courtesy of GENERAL MOTORS CORP.
5. Remove the battery positive cable nut and cable from the generator.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
7. Remove the lower radiator baffle. Refer to Radiator Air Baffle Assemblies and Deflectors in Engine Cooling.
8. Remove the battery cable conduit from the conduit retainers.
9. Remove the starter motor BAT terminal nut from the starter motor.
10. Remove the battery positive cable from the starter motor BAT terminal.
11. Lower the vehicle.
12. Remove the battery positive cable from the vehicle.