Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating License Lamp Bulb

Courtesy of GENERAL MOTORS CORP.

Install the bulb (1) to the socket.
Wipe the bulb to ensure the bulb is free of dirt or oil.

Fig 2: Removing/Installing License Lamp Lens

Courtesy of GENERAL MOTORS CORP.

Position the license lamp lens to the liftgate.
Verify that the license lamp lens gasket is fully seated to the liftgate.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 license lamp lens retaining screws.
Tighten: Tighten the screws to 1.4 N.m (12 lb in).