Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the electrical connector to the stop lamp switch (1).
- Position the stop lamp switch (1) on the pushrod (2) and install the assembly on the brake pedal pin.
- Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place.
- Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.