Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
- Remove the pushrod retainer (3) from the brake pedal pin (4).
- Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
- Disconnect the stop lamp switch (1) electrical connector.
- Remove the stop lamp switch from the vehicle.