LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Antilock Brake System And Traction Control System) >> Repair Instructions >> Traction Control Switch Replacement (GMC, Chevrolet) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (GMC) or Trim Plate Replacement - Instrument Panel (I/P) Accessory (Oldsmobile/Buick) , Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile/Buick) in Instrument Panel, Gages, and Console.
    2. Fig 1: Traction Control Switch Electrical Connector (GMC, Chevrolet)
    GM651279Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the traction control switch.
  3. Release the traction control switch locking tabs located behind the trim plate.
  4. Remove the traction control switch from the trim plate
scientia non olet · About LEMON Manuals