Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air cleaner element (6) onto the air outlet duct (3) with a twisting and pushing motion.
- Install the air cleaner element (6) and air outlet duct (3) into the lower air cleaner housing/washer solvent tank assembly (4).
- Install the air cleaner housing (2).
Tighten: Tighten the 3 air cleaner housing retaining screws (1) to 4 N.m (35 lb in).
- Connect the AIR pump inlet hose to the air cleaner air outlet duct.
- Install the radiator support diagonal brace if applicable. Refer to Brace Replacement - Radiator Support Diagonal in Body Front End.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
Ensure the air inlet duct (5) is properly positioned in the lower air cleaner housing/washer solvent tank assembly (4) before installing the air cleaner housing (2).