LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Recline the driver seat rearward to access the left center trim pillar.
  1. Remove the upper portion of the left center trim pillar.
  2. Fig 1: Inside Air Temperature Sensor Assembly
    GM810247Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector.
  4. Remove the retaining clips from the B pillar.
  5. Remove the inside air temperature sensor assembly (1) from the B pillar.