Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Hood Latch Support

Courtesy of GENERAL MOTORS CORP.

Install the hood latch support to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts that retain the hood latch support to the radiator support.
Tighten: Tighten the bolts to 20 N.m (15 lb ft).
Install the hood latch. Refer to Hood Latch Replacement .
Install the headlamp housing panel. Refer to Headlamp Housing Panel Replacement (TrailBlazer) or Headlamp Housing Panel Replacement (Bravada, Envoy, Envoy XUV, Rainier) .