LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Body Rear End) >> Repair Instructions >> Switch Replacement - Midgate Latch >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Midgate Latch Switch
    GM986361Courtesy of GENERAL MOTORS CORP.
  1. Install the latch release switch to the hole in the midgate inner panel.
  2. Press the latch release switch in until all the retaining tabs (2) are fully seated.
  3. Connect the electrical connector (1) to the latch release switch.
  4. Install the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
scientia non olet · About LEMON Manuals