LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (HVAC Systems - Manual) >> Repair Instructions >> Recirculation Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of HVAC Module
    GM651483Courtesy of GENERAL MOTORS CORP.
  1. Install the recirculation actuator.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to the recirculation actuator.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the air inlet assembly.
  4. Install the air inlet assembly screws.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  5. Connect the electrical connector to the recirculation actuator.
  6. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement in Heating, Ventilation and Air Conditioning.
scientia non olet · About LEMON Manuals