LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Frame & Underbody) >> Repair Instructions >> Assist Step Support Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Assist Step Support Brackets
    GM750777Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Position the assist step to the support brackets.

    Install the nuts (1) that retain the assist step to the support brackets.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

  2. Fig 2: Installing Assist Step
    GM743500Courtesy of GENERAL MOTORS CORP.
  3. Position the assist step assembly to the vehicle.
  4. Install the bolts that retain the support brackets to the body.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .