LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Suspension Control System - Suspension Leveling) >> Repair Instructions >> Inflator Air Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inflator air switch to the vehicle.
  2. Install the rear quarter lower trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (TrailBlazer, Envoy, Bravada) or Trim Panel Replacement - Rear Quarter - Left (TrailBlazer EXT, Envoy XL) or to Trim Panel Replacement - Rear Quarter - Right (TrailBlazer, Envoy, Bravada) or Trim Panel Replacement - Rear Quarter - Right (TrailBlazer EXT, Envoy XL) in Interior Trim.
  3. For the Envoy XUV only, install the trim panel. Refer to Trim Panel Replacement - Body Side (Envoy XUV) in Interior Trim.
  4. Raise the vehicle.
  5. Connect the inflator air switch harness to the air compressor.
    Fig 1: Locating Air Spring Compressor
    GM747617Courtesy of GENERAL MOTORS CORP.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals