Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Center Console Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the console. Refer to Console Replacement in Instrument Panel, Gages, and Console.

Fig 2: Disconnecting/Connecting Shift Lock Actuator Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the shift lock actuator (3) electrical connector.

Fig 3: Removing/Installing Shift Lock Actuator

Courtesy of GENERAL MOTORS CORP.

Shift assembly to the low position.
Loosen and remove the screw at the rear of the shiftier assembly.
Shift the assembly to the NEUTRAL position.
Loosen and remove the top screw of the shift lock actuator through the lever slot.
Pull lever to the drive position and remove the shift lock actuator.