LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Lighting Systems) >> Repair Instructions >> Emergency Vehicle Interior Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trim plate bezel from the instrument panel (I/P) cluster. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages, and Console.
  2. Remove the headlamp switch assembly screws.
  3. Pull the headlamp switch assembly from the I/P.
    4. Fig 1: Headlamp Switch Assembly
    GM803664Courtesy of GENERAL MOTORS CORP.
    Fig 2: Disconnecting Electrical Connector From Emergency Vehicle Interior Switch
    GM803666Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the emergency vehicle interior switch.
  5. Remove the emergency vehicle interior switch from the back of the headlamp switch assembly.
    6. Fig 3: Removing Emergency Vehicle Interior Switch
    GM803669Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals