LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the lumbar control switch to the outer seat cushion trim panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws (1) to the lumbar control switch.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: Installing Lumbar Control Switch Screws
    GM787091Courtesy of GENERAL MOTORS CORP.
  3. Install the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals