Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Tray Bolts | 5 N.m | 45 lb in |
| Cross Vehicle Brace Nuts | 18 N.m | 13 lb ft |
| Dash Panel Reinforcement Nuts | 10 N.m | 89 lb in |
| Fender to Door Hinge Pillar Bolts | 10 N.m | 89 lb in |
| Fender to Engine Compartment Side Rail Bolts | 10 N.m | 89 lb in |
| Fender to Front Compartment Side Rail Bolts | 10 N.m | 89 lb in |
| Fender to Rocker Panel Bolts | 10 N.m | 89 lb in |
| Front End Sheet Metal Diagonal Brace to Inner Fender Bolt | 47 N.m | 35 lb ft |
| Front End Sheet Metal Diagonal Brace to Radiator Support Bolts | 25 N.m | 18 lb ft |
| Front Fender Liner Screws | 2 N.m | 18 lb in |
| Front Fender Liner Stud Nut | 4 N.m | 35 lb in |
| Front Fender Liner to Front Bumper Fascia Screws | 2 N.m | 18 lb in |
| Front Fender to Lower Engine Compartment Side Rail Bolts | 5 N.m | 45 lb in |
| Front Fender Liner to Rear of Fender Bolt | 7 N.m | 61 lb in |
| Hood Release Handle Bolts | 2 N.m | 18 lb in |
| Hood Hinge Pivot Bolt | 25 N.m | 18 lb ft |
| Hood Hinge to Fender Bolts | 25 N.m | 18 lb ft |
| Hood Hinge to Hood Bolts | 25 N.m | 18 lb ft |
| Hood Latch Support Bolts | 25 N.m | 18 lb ft |
| Hood Latch Support Nut | 10 N.m | 89 lb in |
| Hood Latch to Center Support Bolts | 10 N.m | 89 lb in |