Lower Control Arm Bushings Replacement (Vertical): Notes
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 21474-01
Control Arm Bushing Set. See Special Tools and Equipment .
- J 21474-27 1/2 Inch Puller Bolt Thrust Bearing
- J 21474-2 Bushing Installer Remover. See Special Tools and Equipment .
- J 21474-4 Nut
- J 21474-13 Control Arm Bushing Installer. See Special Tools and Equipment .
- J 23444-A High Pressure Lubricant. See Special Tools and Equipment .
- J 34126 Driven Sprocket Support Bearing Installer. See Special Tools and Equipment .
- J 35379 Front Knuckle Support. See Special Tools and Equipment .