LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. NOTE: Refer to Catalytic Converter Movement Notice in Cautions and Notices.
  3. Support the exhaust system.
  4. Remove the 3-way catalytic converter pipe hangers.
  5. Fig 1: View Of Catalytic Converter Hangers
    GM289493Courtesy of GENERAL MOTORS CORP.
  6. Inspect the 3-way catalytic converter brackets for serviceability. Repair or replace as necessary.