Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter Nut | 60 N.m | 44 lb ft |
| EGR Adapter Pipe to Exhaust Manifold Bolt 3.8L | 29 N.m | 21 lb ft |
| Engine Lift Bracket Bolt/Nut | 30 N.m | 22 lb ft |
| Exhaust Crossover Pipe Bolt/Stud 3.8L | 20 N.m | 15 lb ft |
| Exhaust Crossover Pipe Heat Shield Bolt 3.4L | 10 N.m | 89 lb in |
| Exhaust Crossover Pipe Heat Shield Nut 3.8L | 20 N.m | 15 lb ft |
| Exhaust Crossover Pipe Nut 3.4L | 25 N.m | 18 lb ft |
| Exhaust Manifold Bolt/Nut 3.8L | 30 N.m | 22 lb ft |
| Exhaust Manifold Heat Shield Bolt 3.4L | 10 N.m | 89 lb in |
| Exhaust Manifold Heat Shield Nut 3.8L | 20 N.m | 15 lb ft |
| Exhaust Manifold Nut 3.4L | 16 N.m | 12 lb ft |
| Exhaust Manifold Pipe Stud Nut | 32 N.m | 24 lb ft |
| Exhaust Pipe Rear Hanger Bolt | 25 N.m | 18 lb ft |
| Exhaust Pipe Stud | 45 N.m | 33 lb ft |
| Fuel Injector Sight Shield Bracket Nut | 30 N.m | 22 lb ft |
| Rear Bumper Impact Bar Bolt | 25 N.m | 18 lb ft |