LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 261 (Lighting Systems) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
  2. Disengage but do not remove the connector position assurance (CPA) on the connector.

    Disconnect the electrical connector (2).

    3. Fig 1: Electrical Connector & CPA
    GM1204640Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw.
    4. Fig 2: Brake Pedal Position Sensor Screw
    GM1204637Courtesy of GENERAL MOTORS CORP.
  4. Remove the brake pedal position sensor.
scientia non olet · About LEMON Manuals